3Ware HW Raid p0 DEGRADED u0

Dieses Thema im Forum "Server Administration" wurde erstellt von etron770, 2. Juli 2013.

  1. etron770

    etron770 Member

    Zuletzt bearbeitet: 4. Juli 2013
  2. F4RR3LL

    F4RR3LL Member

    Platte im A..... möglicherweise.
    Ja. Drum Backups bereithalten. Das sollte zwar ohne Verlust machbar sein. Aber murphys law sieht das nunmal anders.

    Was sagen denn die smart Werte?
    3ware sollte ja, je nach Controller, mit smartmontools laufen. http://sourceforge.net/apps/trac/smartmontools/wiki/Supported_RAID-Controllers

    Gruß Sven
     
    Zuletzt bearbeitet: 2. Juli 2013
  3. etron770

    etron770 Member

    Code:
    Unit  UnitType  Status         %RCmpl  %V/I/M  Stripe  Size(GB)  Cache  AVrfy 
    ------------------------------------------------------------------------------ 
    u0    RAID-1    DEGRADED       -       -       -       698.637   ON     -        Port   Status           Unit   Size        Blocks        Serial 
    --------------------------------------------------------------- 
    p0     DEGRADED         u0     698.63 GB   1465149168    S13UJ1DPB00566       
    p1     OK               u0     698.63 GB   1465149168    S13UJ1DPB00575   
        
    die Platte die als Degraded markliert ist:
    Code:
    smartctl -a /dev/twe0 -d 3ware,0
    smartctl 5.43 2012-06-05 r3561 [x86_64-linux-2.6.32-5-openvz-amd64] (local build)
    Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Model Family:     SAMSUNG SpinPoint F1 DT
    Device Model:     SAMSUNG HD753LJ
    Serial Number:    S13UJ1DPB00566
    LU WWN Device Id: 5 0000f0 0090b5066
    Firmware Version: 1AA01104
    User Capacity:    750,156,374,016 bytes [750 GB]
    Sector Size:      512 bytes logical/physical
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   8
    ATA Standard is:  ATA-8-ACS revision 3b
    Local Time is:    Tue Jul  2 11:33:37 2013 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x00) Offline data collection activity
                                            was never started.
                                            Auto Offline Data Collection: Disabled.
    Self-test execution status:      (   0) The previous self-test routine completed
                                            without error or no self-test has ever
                                            been run.
    Total time to complete Offline
    data collection:                (10966) seconds.
    Offline data collection
    capabilities:                    (0x7b) SMART execute Offline immediate.
                                            Auto Offline data collection on/off support.
                                            Suspend Offline collection upon new
                                            command.
                                            Offline surface scan supported.
                                            Self-test supported.
                                            Conveyance Self-test supported.
                                            Selective Self-test supported.
    SMART capabilities:            (0x0003) Saves SMART data before entering
                                            power-saving mode.
                                            Supports SMART auto save timer.
    Error logging capability:        (0x01) Error logging supported.
                                            General Purpose Logging supported.
    Short self-test routine
    recommended polling time:        (   2) minutes.
    Extended self-test routine
    recommended polling time:        ( 184) minutes.
    Conveyance self-test routine
    recommended polling time:        (  20) minutes.
    SCT capabilities:              (0x003f) SCT Status supported.
                                            SCT Error Recovery Control supported.
                                            SCT Feature Control supported.
                                            SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   100   099   051    Pre-fail  Always       -       0
      3 Spin_Up_Time            0x0007   086   086   011    Pre-fail  Always       -       5030
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       30
      5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       4
      7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       42
      8 Seek_Time_Performance   0x0025   100   100   015    Pre-fail  Offline      -       10461
      9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       47917
     10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
     11 Calibration_Retry_Count 0x0012   099   099   000    Old_age   Always       -       384
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       30
     13 Read_Soft_Error_Rate    0x000e   100   099   000    Old_age   Always       -       0
    184 End-to-End_Error        0x0037   100   100   099    Pre-fail  Always       -       0
    187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       421
    188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
    190 Airflow_Temperature_Cel 0x0022   068   041   000    Old_age   Always       -       32 (Min/Max 32/34)
    194 Temperature_Celsius     0x0022   068   041   000    Old_age   Always       -       32 (5 80 35 32 0)
    195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       0
    196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       6
    198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x000a   199   199   000    Old_age   Always       -       4
    201 Soft_Read_Error_Rate    0x000a   253   253   000    Old_age   Always       -       0
    202 Data_Address_Mark_Errs  0x0032   100   100   000    Old_age   Always       -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 0
    Warning: ATA Specification requires self-test log structure revision number = 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short offline       Completed without error       00%     47908         -
    # 2  Extended offline    Completed without error       00%     43958         -
    # 3  Extended offline    Completed: read failure       90%     41222         275095156
    # 4  Extended offline    Aborted by host               90%     41222         -
    1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 2
    
    Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
    SMART Selective self-test log data structure revision number 0
    Note: revision number not 1 implies that no selective self-test has ever been run
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    

    Grüße Knut
     

Diese Seite empfehlen