Keine Mail nach Update

Dieses Thema im Forum "Installation und Konfiguration" wurde erstellt von schuehler, 1. Sep. 2010.

  1. schuehler

    schuehler New Member

    Hallo,

    ich habe das Update auf 3.0.2.2 durchgeführt.
    Nun bekomme ich keine email mehr.

    Folgende Fehlermeldung bekomme ich:

    Sep 1 18:12:53 xxx postfix/error[23993]: AED5AD0017: to=, relay=none, delay=25677, delays=25676/1.1/0/0.01, dsn=4.4.2, status=deferred (delivery temporarily suspended: lost connection with 127.0.0.1[127.0.0.1] while receiving the initial server greeting)

    Irgendwie Stimmt da was nicht mit localhost.

    Viele Dank fpr die Hilfe.
     
  2. Till

    Till Administrator

    Starte mal postfix und amavisd neu und dann schau nochmal ins mail.log, welche Fehler dort auftauchen.
     
  3. schuehler

    schuehler New Member

    Hallo,

    der Fehler kommt amavis. Kann aber keinen Fehler finden. Vor dem Update lief der Server einwandfrei.

    Gruss Klaus
     
  4. Till

    Till Administrator

    Da müssen noch andere Fehler im log stehen, poste die bitte mal.
     
  5. schuehler

    schuehler New Member

    Hallo,

    hier ein Auszug aus den Logfile:

    Sep 3 16:54:56 mx4 amavis[18980]: (!)DENIED ACCESS from IP xx.xxx.xx.xx3, policy bank ''

    Ein Fehler der mit 127.0.0.0 zu haben könnte. Mein Server ist ein vserver.
    Lief aber vor dem Update Einwandfrei.

    Diese Meldungen sind auch neu:

    Sep 1 02:00:01 mx4 postfix/smtpd[13426]: connect from localhost.localdomain[127.0.0.1]
    Sep 1 02:00:01 mx4 postfix/smtpd[13426]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
    Sep 1 02:00:01 mx4 postfix/smtpd[13426]: disconnect from localhost.localdomain[127.0.0.1]
    Sep 1 02:02:08 mx4 postfix/scache[13149]: statistics: start interval Sep 1 01:58:48
    Sep 1 02:02:08 mx4 postfix/scache[13149]: statistics: domain lookup hits=0 miss=1 success=0%
    Sep 1 02:02:08 mx4 postfix/scache[13149]: statistics: address lookup hits=0 miss=1 success=0%


    Viele Grüsse Klaus
     
  6. Till

    Till Administrator

    Poste bitte mal den Inhalt der Datei /etc/hosts und der postfix main.cf und master.cf
     
  7. schuehler

    schuehler New Member

    Hallo,

    hier die Auszüge aus den Konfigs.

    Viele Grüsse

    # /etc/hosts

    127.0.0.1 localhost.localdomain localhost
    xx.xxx.xx.xxx mx4.skon.com mx4

    # The following lines are desirable for IPv6 capable hosts
    # (added automatically by netbase upgrade)

    ::1 ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhosts

    postfix.main


    # See /usr/share/postfix/main.cf.dist for a commented, more complete version


    # Debian specific: Specifying a file name will cause the first
    # line of that file to be used as the name. The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname

    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no

    # appending .domain is the MUA's job.
    append_dot_mydomain = no

    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h

    readme_directory = /usr/share/doc/postfix

    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache

    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.

    myhostname = mx4.skon.com
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    myorigin = /etc/mailname
    mydestination = mx4.skon.com, localhost, localhost.localdomain
    relayhost =
    mynetworks = 127.0.0.0/8 [::1]/128
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    html_directory = /usr/share/doc/postfix/html
    virtual_alias_domains =
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/$
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /var/vmail
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_ac$
    smtpd_tls_security_level = may
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domai$
    smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
    smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = maildrop
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    content_filter = amavis:[127.0.0.1]:10024
    receive_override_options = no_address_mappings
    message_size_limit = 0
    relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf


    master


    #
    # Postfix master process configuration file. For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type private unpriv chroot wakeup maxproc command + args
    # (yes) (yes) (yes) (never) (100)
    # ==========================================================================
    smtp inet n - - - - smtpd
    #submission inet n - - - - smtpd
    # -o smtpd_tls_security_level=encrypt
    # -o smtpd_sasl_auth_enable=yes
    # -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #smtps inet n - - - - smtpd
    # -o smtpd_tls_wrappermode=yes
    # -o smtpd_sasl_auth_enable=yes
    # -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #628 inet n - - - - qmqpd
    pickup fifo n - - 60 1 pickup
    cleanup unix n - - - 0 cleanup
    qmgr fifo n - n 300 1 qmgr
    #qmgr fifo n - - 300 1 oqmgr
    tlsmgr unix - - - 1000? 1 tlsmgr
    rewrite unix - - - - - trivial-rewrite
    bounce unix - - - - 0 bounce
    defer unix - - - - 0 bounce
    trace unix - - - - 0 bounce
    verify unix - - - - 1 verify
    flush unix n - - 1000? 0 flush
    proxymap unix - - n - - proxymap
    proxywrite unix - - n - 1 proxymap
    smtp unix - - - - - smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay unix - - - - - smtp
    -o smtp_fallback_relay=
    # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5

    showq unix n - - - - showq
    error unix - - - - - error
    retry unix - - - - - error
    discard unix - - - - - discard
    local unix - n n - - local
    virtual unix - n n - - virtual
    lmtp unix - - - - - lmtp
    anvil unix - - - - 1 anvil
    scache unix - - - - 1 scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent. See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop unix - n n - - pipe
    flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nex$
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp unix - n n - - pipe
    flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail unix - n n - - pipe
    flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp unix - n n - - pipe
    flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix - n n - 2 pipe
    flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${exten$
    mailman unix - n n - - pipe
    flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py


    amavis unix - - - - 2 smtp
    -o smtp_data_done_timeout=1200
    -o smtp_send_xforward_command=yes

    127.0.0.1:10025 inet n - - - - smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_client_restrictions=
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o mynetworks=127.0.0.0/8
    -o strict_rfc821_envelopes=yes
    -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    -o smtpd_bind_address=127.0.0.1
     

Diese Seite empfehlen