Plötzlich keine E-Mails versenden möglich / Postfix

Deex

Member
Grüße,

ich stehe vor einem Problem, ich kann plötzlich keine E-Mails mehr versenden über meinen Externen Mailserver. Jedesmal wenn ich versuche mich zu verbinden mit Outlook erhalte ich einen Socketfehler 10060. Ich habe dann natürlich mal geschaut ob auf den Ports gelauscht wird

netstat -tanp | grep :25
root@NbI-1704:~# netstat -tanp|grep 25
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 1555/master
tcp 0 0 127.0.0.1:10025 0.0.0.0:* LISTEN 1555/master
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 1125/mysqld

Dann in den Mail Logs geschaut, das einzige was ich bekomme ist das hier dazu:
Code:
Jun  2 09:28:31 NbI-1704 dovecot: imap-login: Login: user=<joel@gnetwork.eu>, method=PLAIN, rip=87.134.82.98, lip=31.185.111.69, mpid=11659, session=<Am2fjUY0dABXhlJi>
Jun  2 09:28:32 NbI-1704 dovecot: imap(joel@gnetwork.eu): Disconnected: Logged out in=1255 out=9298
Jun  2 09:30:02 NbI-1704 dovecot: imap-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<rl4Dk0Y0jAAAAAAAAAAAAAAAAAAAAAAB>
Jun  2 09:30:02 NbI-1704 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<eJQDk0Y06wAAAAAAAAAAAAAAAAAAAAAB>
Jun  2 09:30:02 NbI-1704 postfix/smtpd[12981]: connect from localhost.localdomain[127.0.0.1]
Jun  2 09:30:02 NbI-1704 postfix/smtpd[12981]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Jun  2 09:30:02 NbI-1704 postfix/smtpd[12981]: disconnect from localhost.localdomain[127.0.0.1]
Jun  2 09:35:01 NbI-1704 dovecot: imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<+7zdpEY07AAAAAAAAAAAAAAAAAAAAAAB>
Jun  2 09:35:01 NbI-1704 postfix/smtpd[17360]: connect from localhost.localdomain[127.0.0.1]
Jun  2 09:35:02 NbI-1704 postfix/smtpd[17360]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Jun  2 09:35:02 NbI-1704 postfix/smtpd[17360]: disconnect from localhost.localdomain[127.0.0.1]
Jun  2 09:35:02 NbI-1704 dovecot: pop3-login: Disconnected (no auth attempts in 1 secs): user=<>, rip=::1, lip=::1, secured, session=<j0HfpEY0SwAAAAAAAAAAAAAAAAAAAAAB>
Jun  2 09:35:34 NbI-1704 dovecot: imap-login: Login: user=<joel@gnetwork.eu>, method=PLAIN, rip=87.134.82.98, lip=31.185.111.69, mpid=17862, session=<vRXWpkY0RgBXhlJi>
Jun  2 09:35:35 NbI-1704 dovecot: imap(joel@gnetwork.eu): Disconnected: Logged out in=1255 out=9298
Jun  2 09:40:02 NbI-1704 dovecot: imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<kWvLtkY0CgAAAAAAAAAAAAAAAAAAAAAB>
Jun  2 09:40:02 NbI-1704 postfix/smtpd[21812]: connect from localhost.localdomain[127.0.0.1]
Jun  2 09:40:02 NbI-1704 postfix/smtpd[21812]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Jun  2 09:40:02 NbI-1704 postfix/smtpd[21812]: disconnect from localhost.localdomain[127.0.0.1]
Jun  2 09:40:02 NbI-1704 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<0t7MtkY0aQAAAAAAAAAAAAAAAAAAAAAB>
Jun  2 09:41:30 NbI-1704 dovecot: imap-login: Login: user=<joel@gnetwork.eu>, method=PLAIN, rip=87.134.82.98, lip=31.185.111.69, mpid=23104, session=<VrkFvEY0PgBXhlJi>
Jun  2 09:41:31 NbI-1704 dovecot: imap(joel@gnetwork.eu): Disconnected: Logged out in=1255 out=9298

service postfix status
● postfix.service - LSB: Postfix Mail Transport Agent
Loaded: loaded (/etc/init.d/postfix)
Drop-In: /run/systemd/generator/postfix.service.d
└─50-postfix-$mail-transport-agent.conf
Active: active (running) since Do 2016-06-02 07:25:14 MEST; 2h 24min ago
Process: 1244 ExecStart=/etc/init.d/postfix start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/postfix.service
├─ 1555 /usr/lib/postfix/master
├─ 1565 qmgr -l -t unix -u
├─ 1796 tlsmgr -l -t unix -u -c
└─23645 pickup -l -t unix -u -c

Jun 02 09:30:02 NbI-1704 postfix/smtpd[12981]: disconnect from localhost.l...]
Jun 02 09:35:01 NbI-1704 postfix/smtpd[17360]: connect from localhost.loca...]
Jun 02 09:35:02 NbI-1704 postfix/smtpd[17360]: lost connection after CONNE...]
Jun 02 09:35:02 NbI-1704 postfix/smtpd[17360]: disconnect from localhost.l...]
Jun 02 09:40:02 NbI-1704 postfix/smtpd[21812]: connect from localhost.loca...]
Jun 02 09:40:02 NbI-1704 postfix/smtpd[21812]: lost connection after CONNE...]
Jun 02 09:40:02 NbI-1704 postfix/smtpd[21812]: disconnect from localhost.l...]
Jun 02 09:45:02 NbI-1704 postfix/smtpd[26184]: connect from localhost.loca...]
Jun 02 09:45:02 NbI-1704 postfix/smtpd[26184]: lost connection after CONNE...]
Jun 02 09:45:02 NbI-1704 postfix/smtpd[26184]: disconnect from localhost.l...]
Hint: Some lines were ellipsized, use -l to show in full.

Die Error Log sagen
Jun 2 06:19:29 NbI-1704 postfix/smtpd[4620]: warning: hostname pong.jade.servdiscount-customer.com does not resolve to address 85.14.244.222
Jun 2 06:28:09 NbI-1704 postfix/smtpd[12219]: warning: hostname pong.jade.servdiscount-customer.com does not resolve to address 85.14.244.222
Jun 2 06:35:40 NbI-1704 postfix/smtpd[18117]: warning: hostname pong.jade.servdiscount-customer.com does not resolve to address 85.14.244.222
Jun 2 06:35:41 NbI-1704 postfix/smtpd[18117]: warning: hostname pong.jade.servdiscount-customer.com does not resolve to address 85.14.244.222

Wobei Pong mein Master Server ist. Hier habe ich zumindest eine neuerstellung des Fully qualified domain name in die Wege geleitet.

Was mich besonders daran verwundert ist das da steht er hat 0 Sekunden gewartet. Ich habe auch keinen indiz was da plötzlich los ist und warum nix mehr geht, vor einigen Tagen noch war alles kein Problem. Reboot habe ich z.B. auch mal gemacht.
 
Zuletzt bearbeitet:

Deex

Member
Abschließend noch meine Postfix Mater.conf (neuer Beitrag da der alte zu groß ist)

Code:
#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd
#smtp      inet  n       -       -       -       1       postscreen
#smtpd     pass  -       -       -       -       -       smtpd
#dnsblog   unix  -       -       -       -       0       dnsblog
#tlsproxy  unix  -       -       -       -       0       tlsproxy
submission inet n       -       -       -       -       smtpd
  -o syslog_name=postfix/submission
  -o smtpd_tls_security_level=encrypt
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_reject_unlisted_recipient=no
  -o smtpd_client_restrictions=$mua_client_restrictions
  -o smtpd_helo_restrictions=$mua_helo_restrictions
  -o smtpd_sender_restrictions=$mua_sender_restrictions
  -o smtpd_recipient_restrictions=
  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
smtps     inet  n       -       -       -       -       smtpd
  -o syslog_name=postfix/smtps
  -o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_reject_unlisted_recipient=no
  -o smtpd_client_restrictions=$mua_client_restrictions
  -o smtpd_helo_restrictions=$mua_helo_restrictions
  -o smtpd_sender_restrictions=$mua_sender_restrictions
  -o smtpd_recipient_restrictions=
  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628       inet  n       -       -       -       -       qmqpd
pickup    unix  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      unix  n       -       n       300     1       qmgr
#qmgr     unix  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       -       -       -       smtp
relay     unix  -       -       -       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
retry     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix    -    n    n    -    2    pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}

dovecot   unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop}
amavis unix - - - - 2 smtp
        -o smtp_data_done_timeout=1200
        -o smtp_send_xforward_command=yes

127.0.0.1:10025 inet n - - - - smtpd
        -o content_filter=
        -o local_recipient_maps=
        -o relay_recipient_maps=
        -o smtpd_restriction_classes=
        -o smtpd_client_restrictions=
        -o smtpd_helo_restrictions=
        -o smtpd_sender_restrictions=
        -o smtpd_recipient_restrictions=permit_mynetworks,reject
        -o mynetworks=127.0.0.0/8
        -o strict_rfc821_envelopes=yes
        -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks

Relay bezogene Sicherheitseinstellungen
header_checks
Code:
/^Received:.*with ESMTPSA/              IGNORE
/^X-Originating-IP:/    IGNORE
/^X-Mailer:/            IGNORE
/^Mime-Version:/        IGNORE
/^\s*User-Agent/        IGNORE
/^\s*X-Enigmail/        IGNORE
/^Received:/                 IGNORE

auth_header_checks.pcre
Code:
/^\s*(Received: from)[^\n]*(.*for <.*@(?!servdiscount-customer.com).*)/ REPLACE $1 [127.0.0.1] (localhost [127.0.0.1])$2
/^\s*Mime-Version: 1.0.*/ REPLACE Mime-Version: 1.0
/^\s*User-Agent/ IGNORE
/^\s*X-Enigmail/ IGNORE
/^\s*X-Mailer/ IGNORE
/^\s*X-Originating-IP/ IGNORE
 
Zuletzt bearbeitet:

Deex

Member
Ah problem gefunden, ich habe auf LTE umgestellt und die Telekom kam auf die GENIALE idee nur externe Mailserver zulassen die gewhitelistet sind. Wtf,- wer macht denn sowas dummes. *wirft mit Torten*
 

Deex

Member
das macht die Telekom schon seit über einem Jahr mit den neuen Speedports.
Da muss man erstmal drauf kommen :p, ich habe meinen halben Server auseinander genommen um das Problem zu finden ^_^. Also Dumm ist relativ, ich rege mich halt darüber auf das sowas nicht ordentlich propagandiert wird. Für Geschäftliche dinge ist das echt nervig wenn man es nicht weiß. Dachte schon mein Mailserver hat was an der Mütze vor allem weil ich über meine anderen konten alles reibungslos versenden konnte.
 
Zuletzt bearbeitet:

Werbung

Top