ISPConfig 3 Problem mit postfix und amavis

Dieses Thema im Forum "Installation und Konfiguration" wurde erstellt von Nexan, 20. Aug. 2009.

  1. Nexan

    Nexan New Member

    Hi,
    ich hab mir nun auf meinen vServer (Linux-VServer) mit Debian Lenny (64 Bit) ISPConfig 3 installiert. Kurz: Es funktioniert alles wunderbar bis auf das empfangen und senden von Emails.

    Erstmal das Problem mit dem Empfangen von Emails:
    Laut mail.log läuft der Fehler immer folgendermaßen ab:
    Code:
    postfix/smtpd[356]: connect from mail.sender-domain.de[Sender-IP]
    postfix/smtpd[356]: 282C6C64956: client=mail.sender-domain.de[Sender-IP]
    postfix/cleanup[362]: 282C6C64956: message-id=<[EMAIL="ID@sender-domain.de"]ID@sender-domain.de[/EMAIL]>
    postfix/qmgr[11160]: 282C6C64956: from=<[EMAIL="user@sender-domain.de"]user@sender-domain.de[/EMAIL]>, size=1024, nrcpt=1 (queue active)
    amavis[13763]: (!)DENIED ACCESS from IP MEINE-IP, policy bank ''
    postfix/smtpd[356]: disconnect from mail.sender-domain.de[Sender-IP]
    postfix/smtp[363]: 282C6C64956: to=<[EMAIL="test@meine-domain.de"]test@meine-domain.de[/EMAIL]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.09, delays=0.09/0/0/0, dsn=4.4.2, status=deferred (lost connection with 127.0.0.1[127.0.0.1] while receiving the initial server greeting)
    So wie ich das sehe verweigert amavis den Zugriff auf die eigene IP. Nur warum?:confused:
    Sämtliche Postfix und Amavis Config-Dateien (die config-Dateien sind in dem Zustand wie sie von TSPConfig angelegt wurden) habe ich schon durchwühlt konnte aber den Fehler nicht erkennen und auch Tante-Google hat zu dem Fehler nichts passendes gefunden.

    Kann mir jemand einen Tipp oder einen Wink in die richtige Richtung geben was da schief läuft (vielleicht hatte jemand schon ein ähnliches Problem)? Bin für jeden Hinweis dankbar. :)
     
    Zuletzt bearbeitet: 23. Aug. 2009
  2. Till

    Till Administrator

    Poste mal den Inhalt der main.cf und master.cf
     
  3. Nexan

    Nexan New Member

    Hätte ich eigentlich gleich Posten sollen.:eek:
    main.cf
    Code:
    # See /usr/share/postfix/main.cf.dist for a commented, more complete version
    
    
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    
    readme_directory = /usr/share/doc/postfix
    
    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    
    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.
    
    myhostname = host.meine-domain.de
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    myorigin = /etc/mailname
    mydestination = host.meine-domain.de, localhost, localhost.localdomain
    relayhost = 
    mynetworks = [URL="http://127.0.0.0/8"]127.0.0.0/8[/URL] [::1]/128
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    html_directory = /usr/share/doc/postfix/html
    virtual_alias_domains = 
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /var/vmail
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
    smtpd_tls_security_level = may
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
    smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
    smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = maildrop
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    content_filter = amavis:[127.0.0.1]:10024
    receive_override_options = no_address_mappings
    message_size_limit = 0
    
    master.cf
    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628      inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
        -o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=R user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix    -    n    n    -    2    pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=[URL="http://127.0.0.0/8"]127.0.0.0/8[/URL]
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    
    
     
  4. Till

    Till Administrator

    Sieht gut aus. Poste mal die Ausgabe von:

    ifconfig
     
  5. Nexan

    Nexan New Member

    Danke schon mal für die bisherige Unterstützung.:)
    ifconfig:
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:24:21:b4:30:35
              inet addr:*.*.*.213  Bcast:*.*.*.255  Mask:255.255.255.192
              UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
              RX packets:120358299 errors:0 dropped:0 overruns:0 frame:0
              TX packets:104934658 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:110666538241 (103.0 GiB)  TX bytes:72621082996 (67.6 GiB)
              Interrupt:29 Base address:0x6000
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:340499 errors:0 dropped:0 overruns:0 frame:0
              TX packets:340499 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:133592893 (127.4 MiB)  TX bytes:133592893 (127.4 MiB)
    PS: Hab die ersten drei Blöcke meiner IP mal unkenntlich gemacht (die * stehen stellvertretend für die IP meines vServers)
     
  6. Till

    Till Administrator

  7. Nexan

    Nexan New Member

    Hi,
    vielen dank das Problem konnte auf diese Weise gelöst werden.:)
     

Diese Seite empfehlen